Stabilising the Leaning Tower of Pisa
Contents |
[edit] Introduction
The Leaning Tower of Pisa is the freestanding bell tower of the cathedral of the Italian city of Pisa. Famous for its unintended tilt, the 56 m tower took nearly 200 years to build - work started in 1173. Five years later it started tilting.
The tilt was noticeable as workers built the second floor. The shift was caused by shallow foundations of 3 m and unstable subsoil.
Engineers working on the tower in later years built upper floors with one side shorter than the other to compensate. This means the structure is curved as well as tilting.
Work was slow and sometimes abandoned for decades as Pisa was often at war with nearby Florence, Genoa and other city states. The tower was finally completed in 1372.
Attempts were made throughout the tower's history to correct the tilt. Some of them made the problem worse and by the 1990s there were fears the tower could collapse altogether.
The Italian government appointed a 'committee of 13 experts' to come up with a plan to save the tower in 1990. The team was led by British engineering expert John Burland.
[edit] Difference the project has made
Work completed in 2001 saw the tower straightened by 38 cm.
A 2013 study found that 'the bell tower is stable but tending to straighten' and that it had moved a further 2.5 cm vertically since 2001.
The structure is expected to straighten another couple of millimetres and then start to lean again – but at a much slower rate.
Engineers believe the tower's future is now secure for at least 200 years.
[edit] How the tower was straightened
The tower was closed to the public in 1990 for engineers to come up with a way to stop the tower collapsing.
The team hit on a solution that would reduce the tower's inclination by about half degree - reducing stress on the building's masonry and stabilising its foundations.
The method – known as soil extraction – saw engineers dig a series of tunnels on the north side of the tower and remove small amounts of earth. (The tower leans to the south.) Steel cables helped pull it back into its original position.
Around two lorry-loads of soil needed to be extracted for the foundations to right themselves.
The project team also found that the tower tilted more in winter as the north side water table was higher than the south when it rained. This lifted the north side even more.
Engineers dug drains so the water could flow away into wells.
The tower straightened itself by 38 cm after the work was done and has continued to straighten since. It reopened to the public in 2001.
[edit] Fascinating facts
There are other buildings that lean more than the Tower of Pisa. The Capital Gate building in Abu Dhabi, UAE is the world's most tilted man-made tower. It has an 18-degree slope – 5 times more than Pisa – although it was deliberately constructed to slant.
Pisa is not even the most accidentally lopsided building in the world. Medieval towers in the German towns of Bad Frankenhausen and Suurhusen both lean more than the Italian structure.
There's also the Leaning Tower of Wanaka – part of the Puzzling World tourist attraction near Wanaka, New Zealand. The tower balances on one corner and leans at an angle of 53-degrees to the ground.
This article was originally published here in 2018 by ICE.
--The Institution of Civil Engineers
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.